Ste p 2 : Press and hold “ ” button until LCD
display occur then release , Transmitter is
power on .
Ste p 3: Press and hold “ ” button and “ ” button
at the same time ,until the digital number on
the LCD display change automatically ,then
release. Enter cancel matched receiver mode .
The number changes like “08,09,10,11……”,
increasing automatically
Ste p 4 : Close the Receive Collar 50~100mm, Press the
Dog Selection Button one time ( You can
press “1” or “2” or “3” freely, It is same). You
can listen to 2 “beep” sound from receiver.
Ste p 5 : The green Led light of Receiver flash
frequently . Congratulate You cancel the
matched Receiver successfully .
- 13 -
To Next Page
Loading...