Trainertec Electronic DT1200V - Canceling a Matched Receiver

Ste p 6 : Press and hold “ ” button and “ ” button
at the same time again ,until the digital number
on the LCD display no change ,then release .
Ste p 7 : Test matched Receiver---Chose dog first, then
press “ ” button , you can hear the “beep”
sound from the matched receiver .
Congratulate you , match receiver
successfully .
Note: After matched receive collar , the
dog selection button will return to “1”
default . Before test the matched collar ,
Please chose dog first .
2. Cancel a matched Receiver Follow up the below
steps one by one to cancel the matched Receiver:
Ste p 1 : Take out 1 Pcs matched receiver . Press and
hold “ON/OFF” button .after two “beep”
sound , receiver is power on ,Green Led flash
1 time per 5 second .
- 12 -