shock, and will stop automatically after 8 seconds
“1,2,3 ” buttons: Dog Selection Button , default is “1” .
Your transmitter is capable of training up to three dogs
with optional receive collars. You select 1 dog, LCD
display dog ID “A XX”. If you want to train 2 dog,
press “2” button , LCD will display “BXX” If you want
to train 3 dog, press “3” button again, LCD will display
“C XX”. “XX” is for showing the shock & vibration
level .
The transmitter has the memory functions to keep up
the suitable shock & vibration levels for different dogs.
10 levels of shock stimulation, 10 levels of vibration
stimulation. One tone
NOTE: The red Led light will flash when the
battery is low power. Recharge the battery at once.
- 8 -
To Next Page
Loading...