“ ” and “ “ buttons: press these buttons to
adjust the shock intensity and Vibration intensity from
1 to 10 level
“ ” button: it is the power switch; hold this button
for 4 seconds to switch on power, then LCD will
display the default “A01”. You may change Dog ID by
press the relative buttons. If you want to switch off the
power, hold this button for 4 seconds to switch off
power.
“ ” button: no-stimulation warning buzz
“ ” button: Emit vibration stimulation. Press 1
time , vibrate 1 time . Press and hold on , emit
continuous vibration, and will stop automatically after
8 seconds
“ ” button: Emit shock stimulation. Press 1 time ,
emit 1 shock . Press and hold on , emit continuous
- 7 -
To Next Page
Loading...