MASONRY (COMPARATIVE)
SCALE 5
The Moisture Encounter 5 will detect elevated moisture
conditions within bricks, blocks and concrete materials.
Always press the electrodes firmly against the surface.
The moisture profile of the masonry wall or other can be
determined by taking readings across the surface. The
Moisture Encounter 5 will read through most paints and
wall coverings. It can identify the different levels of mois-
ture even if not apparent on the surface.
Concrete Moisture Measurement:
The Moisture Encounter 5 is not calibrated for con-
crete. The Tramex Concrete Moisture Encounter CME5
or CMEX5 are specifically designed for concrete floor-
ing and recommended where quantitative measure-
ments are required. However, a useful comparative
indication of the moisture conditions of the concrete
or subfloor can be obtained with the ME5 set on the
Masonry Scale 5.
Acceptably Dry Brick, Block:
The Moisture Encounter ME5 will give low readings
when the brick, block is acceptably dry. Due to the
hygroscopic nature of this material, moisture values
are affected by ambient humidity and thus can vary
according to the climate conditions. We recommend
checking what is ‘acceptably dry’ in your area and use
the instrument to compare these with readings that
are ‘acceptable’ or 'unacceptable'.
30
MOISTURE ENCOUNTER 5 USER GUIDE
- Back to Top -
To Next Page
Loading...
Need help?
General
