HOW TO USE THE WOOD SG TABLES
When testing wood, which does not have an SG of 0.40,
the meter reading can be adjusted by referring to the ta-
bles shown on pages 33 and 34. For example, if the wood
being tested has an SG of 0.50 and the meter reading
is 17% (top row of table) then the adjusted moisture
content reading can be found where the 0.50 SG row
intersects with 17% meter reading column. For this
example the adjusted moisture content would be 15%.
32
MOISTURE ENCOUNTER 5 USER GUIDE
- Back to Top -
To Next Page
Loading...
