Trane Technologies 4YCC4036E1090A - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2022 1188--EEBB4400DD11--11AA--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 — 5 Ton
4YCC4024E1060A
4YCC4030E1070A
4YCC4036E1070A
4YCC4036E1090A
4YCC4042E1060A
4YCC4042E1090A
4YCC4048E1070A
4YCC4048E1090A
4YCC4060E1090A
4YCC4060E1115A
Installation and Operations Manual

Summary

Safety Section

Charging in Cooling above 55°F OD Ambient

CHARGING BELOW 55°F

Evacuate system and weigh in nameplate charge or use factory charge.

Determine Unit Clearances

Unit Installation

Install Flue Hood

Procedure for installing the flue hood included in the literature package.

Ground Level Installation

Steps for placing and securing the unit on a pad for ground level installation.

Convert Horizontal Airflow to Down Airflow

Install Full Perimeter Roof Mounting Curb

Lifting and Rigging

Rooftop Installation - Frame Mounting

Rooftop Installation - No Curb;Frame

Ductwork Installation

Attaching Downflow Ductwork to Roof Curb

Attaching Downflow Ductwork to Roof Frame

Attaching Horizontal Ductwork to Unit

Gas Piping Installation

Trane Technologies 4YCC4036E1090A Specifications

General

Brand	Trane Technologies
Model	4YCC4036E1090A
Category	Air Handlers
Language	English