Trane Technologies 4YCC4060E1115A User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2022 1188--EEBB4400DD11--11AA--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 — 5 Ton
4YCC4024E1060A
4YCC4030E1070A
4YCC4036E1070A
4YCC4036E1090A
4YCC4042E1060A
4YCC4042E1090A
4YCC4048E1070A
4YCC4048E1090A
4YCC4060E1090A
4YCC4060E1115A
Installation and Operations Manual

Trane Technologies 4YCC4060E1115A Specifications

General

Phase	1
Airflow	2000 CFM
Filter Type	Standard
Cooling Capacity	60000 BTU/H
Voltage	208/230V
Heating Capacity	60000 BTU/H

Summary

Safety Section

General Safety Warnings

Important warnings for installation and servicing procedures.

Unit Clearances

Space on Sides Requirements

Diagram showing side clearance needs.

Recommended Service Clearances

Table of required clearances.

Unit Installation

Gas Piping Installation

Gas Pressure Set-up Precautions

Important safety and setup procedures.

Unit Startup

Pre-Start Quick Checklist

Essential checks before initial startup.

Starting the Unit in Cooling Mode

Steps to initiate cooling operation.

Operating Pressure Checks

Procedure for checking system pressures.

Starting the Unit in Heating Mode

Steps to initiate heating operation.

Troubleshooting Chart

Refrigerant Circuit Faults

Faults related to the refrigerant system.

Electrical Faults