Trane Technologies 4TXD2060A10NUA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
April 2022
MMSS--SSVVNN008844AA--EENN
20 SEER Vertical Air Handler
24,000 Btu/h to 60,000 Btu/h
HP Indoor Units
HP Outdoor Units
4MXA2024A10NUA
4MXA2036A10NUA
4MXA2048A10NUA
4MXA2060A10NUA
4TXD2036A10NUA
4TXD2060A10NUA
Installer’s Guide

Trane Technologies 4TXD2060A10NUA Specifications

General

Product Type	Air Handler
Series	4TXD
Nominal Capacity (tons)	5
Cooling Capacity	60, 000 BTU/h
Airflow	2000 CFM
Phase	1
Filter Type	Standard
Width	21 inches

Summary

Key Safety Warnings

General Safety Warning

General safety warning for installers regarding qualified personnel and precautions.

Safety Precautions

Electrical and Grounding Safety

Warnings on electrical shock, grounding, power supply, and chemical exposure.

System Pressure and Ductwork Safety

Hazards from high system pressure, air duct material, and grounding.

Installation Environment Safety

Warnings for installation environment and procedures to prevent injury or fire.

Carbon Monoxide Poisoning Hazard

Danger of CO poisoning in enclosed areas; ensure ventilation for combustion devices.

Installation

Piping Connections

Piping Preparation and Connections

Condensate Removal and Ductwork

Electrical Installation

Electrical Installation Requirements

Installation by trained personnel, circuit breaker, dedicated circuit, and wiring rules.

Electrical Parameters and Wiring

Model specs, ampacity, overcurrent protection, and wiring steps for power/thermostat.

Installation Check and Trial Run

Post-Installation Checks

Trial Run Procedure

Troubleshooting Common Issues

Malfunction Troubleshooting

Table of common phenomena, reasons, and treatments for unit issues.