EasyManua.ls Logo

Trane Technologies 4TWX8024 User Manual

Default Icon
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
August 2022
1188--GGJJ8899DD11--11EE--EENN
Variable Speed Air Handlers
Convertible 2 5 Ton
TAMXB0A24V21DA
TAMXB0B30V31DA
TAMXB0C36V31DA
TAMXB0C42V41DA
TAMXB0C48V41DA
TAMXB0C60V51DA
TM
The Diagnostics Mobile App is available by scanning a
QR code located inside this unit or by searching for the
Link Diagnostics App in your App Store.
NNoottee:: “Graphics in this document are for representation only. Actual model
may differ in appearance.”
NNoottee:: For use with BAYEA series heaters ONLY.
NNoottee:: This unit can be used in Link Communicating mode or 24 volt mode.
NNoottee:: Need to use Diagnostics App to configure blower delays and
accessories etc., in 24 volt mode.
Installer’s Guide
Question and Answer IconNeed help?

Do you have a question about the Trane Technologies 4TWX8024 and is the answer not in the manual?

Trane Technologies 4TWX8024 Specifications

General IconGeneral
BrandTrane Technologies
Model4TWX8024
CategoryAir Handlers
LanguageEnglish

Summary

Installer Guide Introduction and Safety

Variable Speed Air Handler Models

Lists the Convertible Air Handler models covered.

Critical SAFETY WARNING

Highlights essential safety precautions for installation and servicing.

Safety Section Details

Electrical and Refrigerant Hazards

Details dangers related to voltage, current, and refrigerant.

Unit Design and Access

Unit Install Preparation

Placing Unit at Location

Vertical Installation

Horizontal Installation

Connecting the Duct Work

Refrigerant Line Management

Condensate Drain Piping

Electrical - Low Voltage

Control Panel Reinstallation

Electrical - High Voltage

System Start Up

System Charge Adjustments

Sequence of Operation

Checkout Procedures

Related product manuals