Trane Technologies 4YCC4030E1070A User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2022 1188--EEBB4400DD11--11AA--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 — 5 Ton
4YCC4024E1060A
4YCC4030E1070A
4YCC4036E1070A
4YCC4036E1090A
4YCC4042E1060A
4YCC4042E1090A
4YCC4048E1070A
4YCC4048E1090A
4YCC4060E1090A
4YCC4060E1115A
Installation and Operations Manual

Trane Technologies 4YCC4030E1070A Specifications

General

Model Number	4YCC4030E1070A
Category	Air Handlers
Nominal Heating Capacity	30, 000 BTU/H
Voltage	208/230V
Phase	1
Nominal Cooling Capacity	2.5 Tons
Insulation	R-4.2

Summary

Unit Installation

Lifting and Rigging

Safe methods for lifting and moving the unit.

Gas Piping Installation

Procedures for connecting the gas supply line.

Electrical Wiring

Instructions for power supply and wiring connections.

Unit Startup

Pre-Start Quick Checklist

A list of checks before starting the unit.

Starting the Unit in Cooling Mode

Steps to initiate the cooling operation.

Starting the Unit in Heating Mode

Steps to initiate the heating operation.

Final Installation Checklist

Final checks to ensure proper installation.

Troubleshooting Chart

Guide to diagnosing and resolving system faults.

Maintenance

Service Maintenance