To Next PageTo Next Page
Need help?Do you have a question about the Trane Technologies 4YCC4024E1060A and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Filter Type | Standard |
| Cooling Capacity | 24000 BTU |
| Voltage | 208/230V |
| CFM | 800 CFM |
| Heating Capacity | 24000 BTU |
| Depth | 21 inches |
Overview of the manual's purpose and installation scope.
Procedure for checking the unit for damage upon delivery.
Detailed technical data and ratings for various unit models.
Procedure for charging the system in cooling mode above 55°F.
Guidelines for maintaining proper clearances around the unit.
Guidance on selecting an appropriate location for the unit.
Instructions for attaching the flue hood to the unit.
Steps for installing the unit on a ground-level pad.
Procedure to change the unit's airflow direction.
Guidance for installing a roof curb for unit mounting.
Procedure for rooftop mounting without a curb or frame.
Instructions for installing the condensate drain system.
Detailed instructions and safety precautions for gas piping.
Adjustments for unit performance at high altitudes.
Guidelines for making electrical connections.
Requirements for supplying adequate electrical power.
Requirements for a disconnect switch location.
Protection requirements for the branch circuit.
Instructions for running and connecting power supply lines.
Low voltage wiring and thermostat connections.
Setting the thermostat's heat anticipator.
A checklist of items to verify before unit startup.
Procedure for starting the unit in cooling operation.
How to check and interpret operating pressures.
Procedure for checking line voltage during operation.
Steps to safely shut down the unit in cooling mode.
Procedure for starting the unit in heating operation.
Final checks to ensure proper installation and operation.
Overview of how the thermostat controls unit cycles.
Detailed steps of the unit's heating operation.
Detailed steps of the unit's cooling operation.
Recommended annual checks by a qualified technician.
Maintenance tasks for the cooling season.
Maintenance tasks for the heating season.
Procedure for cleaning the flue hood and combustion blower.
Charts showing cooling performance based on temperature and pressure.
Guidance on troubleshooting before calling for service.
