Trane Technologies 4YCC4060E1090A User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2022 1188--EEBB4400DD11--11AA--EENN
Single Packaged Gas/Electric
13.4 SEER2 Convertible, 2 — 5 Ton
4YCC4024E1060A
4YCC4030E1070A
4YCC4036E1070A
4YCC4036E1090A
4YCC4042E1060A
4YCC4042E1090A
4YCC4048E1070A
4YCC4048E1090A
4YCC4060E1090A
4YCC4060E1115A
Installation and Operations Manual

Trane Technologies 4YCC4060E1090A Specifications

General

SEER	Up to 16
Voltage	208/230V
Phase	1
Cooling Capacity	60000 BTU/hr
Nominal Cooling Capacity	60, 000 BTU/h

Summary

Introduction, Unit Inspection and Specification

Review Location and Recommendation Information

Unit Installation

Ground Level Installation

Rooftop Installation - Curb Mounting

Lifting and Rigging

Safety and procedures for lifting and moving the unit.

Rooftop Installation - Frame Mounting

Rooftop Installation - No Curb/Frame

Gas Piping Installation

Gas Pressure Set-up Precautions

Electrical Wiring

Power Wiring

Control Wiring (Class II)

Unit Startup

Pre-Start Quick Checklist

A checklist of items before starting the unit.

Starting the Unit in Cooling Mode

Steps to start the unit in cooling operation.

Operating Pressure Checks

Procedures for checking operating pressures.

Voltage Check

Verifying the voltage supply to the unit.

Starting the Unit in Heating Mode

Steps to start the unit in heating operation.

Sequence of Operation

Heating Cycle

Cooling Cycle

Maintenance

Service Maintenance

Recommendations for routine service by qualified personnel.

Cooling Season

Maintenance checks to perform during the cooling season.

Heating Season

Inspections and routines for the heating season.

Flue Hood and Combustion Blower Cleaning

Pressure Curves

Cooling

Troubleshooting Chart

Important Product Information

Service Information

Guidance on what to check before calling for service.