10
MS-SVN084A-EN
Pre-Installation Instructions
CChheecckkiinngg PPrroodduucctt RReecceeiivveedd
After receiving the product, please check if there is any
damage caused by transportation. Shipping damage is
the responsibility of the carrier. Verify the model
number, specifications and accessories are correct
prior to installation.
BBeeffoorree IInnssttaallllaattiioonn
Carefully read all instructions for the installation prior
to installing product. Make sure each step or procedure
is understood and any special considerations are taken
into account before starting installation. Assemble all
tools, hardware and supplies needed to complete the
installation. Some items may need to be purchased
locally. Make sure everything needed to install the
product is on hand before starting.
CCooddeess && RReegguullaattiioonnss
This product is designed and manufactured to comply
with national codes. It is installer’s responsibilities to
install the product in accordance with such codes and/
or any prevailing local codes/regulations. The
manufacturer assumes no responsibilities for
equipment installed in violation of any codes or
regulations.
RReeppllaacceemmeenntt PPaarrttss
When reporting shortages or damages, or ordering
repair parts, give the complete product model and
serial numbers as stamped on the product.
Replacement parts for this product are available
through your contractor or local distributor.
To Next Page
Loading...