MS-SVN084A-EN
19
Maintenance
This product is designed for dependable service;
however, periodic maintenance should be scheduled
and conducted by trained professional service
personnel. This service should be conducted at least
annually, and should include testing and inspection of
electrical and refrigerant components.
1. The system air filter(s) should be inspected, cleaned
or replaced at least monthly.
2. Make certain that the access panels are replaced
and secured properly before placing the unit back in
operation.
3. The heat transfer surface should be cleaned.
4. The blower motor is permanently lubricated for
normal operating conditions.
Drain Pipe
Regularly check to see if the drain pipe is clogged in
order to ensure drain condensate doesn't overflow and
cause water damage.
Parts Replacement
Purchase parts from the installing or servicing dealer if
necessary.
NNoottee:: During leakage testing, never mix oxygen,
ethyne (acetylene) or other dangerous gases into
the refrigeration circuit. Nitrogen should be used
for leakage testing.
After-Sales Service
In the event you have problems with the
unit or require service, please contact your local installing / servicing dealer.
To Next Page
Loading...