Trane Technologies THERMO KING V400X - Page 40

40
TK 62061-18-IM-EN
Torque to Apply to Compressor Manifold and Fittings
1. The purpose of this section is to indicate the correct torque to apply to Thermo King compressor manifolds (straight
and standard models) and fittings to ensure good performance, reliability and longevity of all direct drive units.
NNoottee:: 50 Nm = 36.87 ft.lb
40 Nm = 29.50 ft.lb
35 Nm = 25.81 ft.lb