46
TK 62061-18-IM-EN
Installing the In-Cab Controller
IImmppoorrttaanntt:: See Section 7 - Electrical Standards in the Thermo King Vehicle Powered Truck Installation Standards and
Procedures Guide (TK 56430). THESE PROCEDURES MUST BE FOLLOWED!
1. Install the mounting bracket for the in-cab control box. Its design allows the mounting bracket to be positioned in
various places in the cab interior. Find aa llooccaattiioonn wwhhiicchh iiss aacccceessssiibbllee aanndd vviissiibbllee ffrroomm tthhee ddrriivveerr’’ss sseeaatt, and
which does not restrict the mobility or visibility of either the driver or the vehicle’s instruments and levers.
2. Depending on the location chosen, the base should be mounted following either Option AA or Option BB.
3. Mount the base of the mounting bracket in the chosen location. Use screws (CC), rubber mat (DD) and metal plate (EE),
which are supplied by Thermo King, as indicated in the drawing.
To Next Page
