TK 62061-18-IM-EN
67
Condenser and Evaporator Dimensions
NNoottee:: Paper Templates are available to assist in the installation of the Condenser and Evaporator. These Templates
provide the installer with a footprint of the component and provide the correct mounting and access hole
locations. These Templates can be downloaded and printed from EMEA Infocentral in the following location:
Technical Publications/ Vehicle Powered Truck/ Drawings and Diagrams/Installation Templates.
IImmppoorrttaanntt:: See Section 4 - Unit Installation Standards and Procedures in the Thermo King Vehicle Powered Truck
Installation Standards and Procedures Guide (TK 61588). THESE PROCEDURES MUST BE FOLLOWED!
To Next Page
