EasyManua.ls Logo

Trane 22 Series User Manual

Trane 22 Series
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installer's Guide
Split System (R-410A)
22 Series Multi-Zone
Inverter System
18,000 Btu/h to 42,000 Btu/h
Model :
4TXM2218A12N
4TXM2221A13N
4TXM2224A14N
4TXM2230A15N
4TXM2236A15N
4TXM2242A15N
June 2020 MS-SVN049F-EN

Questions and Answers:

Trane 22 Series Specifications

General IconGeneral
BrandTrane
Model22 Series
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Warnings and Symbol Definitions

General Safety Warnings

Outlines critical safety warnings related to unit servicing, electrical hazards, and refrigerant handling.

Detailed Safety Guidelines

Installation Safety Rules

Provides numbered safety rules for installation, covering personal safety and equipment protection.

Electrical Safety for Installation

Details safety rules for electrical work, wiring, and grounding during installation.

Pre-Installation Preparations

Installation Site Requirements

Refrigerant Piping System

Refrigerant Piping Precautions

Warns about explosion, gas hazards, and component damage risks associated with refrigerant piping.

Nitrogen Purging for Brazing

Explains the necessity and method of nitrogen purging during brazing to prevent unit damage.

Outdoor Unit Installation and Piping

Flaring and Bending Techniques

Details the correct methods for flaring copper tubing and bending refrigerant pipes without damage.

Refrigerant Connection and Charging

Refrigerant Charge Calculation

Provides guidelines for calculating refrigerant charge based on piping length and height differences.

System Testing and Leak Detection

Vacuum Pump and Leak Check Procedures

Details the process of evacuating the system to microns and performing leak checks using nitrogen and soap bubbles.

Electrical System Installation

General Wiring Safety and Precautions

Emphasizes disconnecting power, following codes, and using proper wiring techniques to prevent hazards.

Electrical Requirements and Grounding

Post-Installation and Testing

Troubleshooting and Error Codes

Common Issues and Solutions

Lists common operating problems, their potential causes, and initial troubleshooting steps.

Error Code Reference

Details error codes indicated by unit indicators and controller messages for diagnostics.

Related product manuals