Trane S*HF*20-75 User Manual

SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and
servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific
knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could
result in death or serious injury. When working on the equipment, observe all precautions in the literature
and on the tags, stickers, and labels that are attached to the equipment.
November 2011 RT-SVP07B-EN
IntelliPak I models
S*HF*20-75 S*HL*20-75
S*HG*90-130 S*HK*90-130 W*HB, W*HE
IntelliPak II models
S*HJ090-162 W*HCA-C
Programming &
Troubleshooting
Guide
IntelliPak™ I and IntelliPak™ II
Commercial Single Zone Rooftop Air Conditioner or
Commercial Rooftop Air Handlers, with Variable Air
Volume (VVDA/VVZT) Controls or Constant Air
Volume (CVDA/CVZT) Controls

Trane S*HF*20-75 Specifications

General

Brand	Trane
Model	S*HF*20-75
Category	Air Conditioner
Language	English

Summary

Warnings, Cautions and Notices

Proper Field Wiring and Grounding Required!

Ensures safe installation by qualified personnel following electrical codes.

Personal Protective Equipment (PPE) Required!

Specifies mandatory PPE for technicians to prevent injury from hazards.

Menu Keys

Unit Operation Keys

General Status Display

General Status Display

Factory Presets

Lists adjustable functions and their factory-assigned values for unit configuration.

SETUP Menu

GENERAL UNIT FUNCTIONS SETUP SUBMENU SCREENS

SETPOINT Menu

Default Supply Air Temp Setpoints

HUMIDITY CONTROL SETPOINT SUBMENU SCREENS

CONFIGURATION Menu

TOP LEVEL CONFIGURATION SCREEN

SERVICE MODE Menu

NOTICE Compressor Failure!

Critical notice regarding compressor startup requirements to prevent premature failure.

COMPRESSOR AND CONDENSER CONTROL SUBMENU SCREENS

Submenu for testing and adjusting compressor and condenser fan controls.

DIAGNOSTICS Menu

Resetting Active Manual Diagnostics