To Next PageTo Next Page
Need help?Do you have a question about the Trane 4WHC3024 and is the answer not in the manual?
General| Cooling Capacity | 24000 BTU/H |
|---|---|
| HSPF | 8.2 |
| Voltage | 208/230V |
| Phase | 1 |
| Refrigerant | R-410A |
| Heating Capacity | 24000 BTU/h |
Covers risks from high voltage, moving fans, combustible gas, and hot surfaces.
Emphasizes safe handling of R-410A refrigerant and high-pressure systems.
Stresses proper grounding, disconnects, and wiring tightness.
Illustrates critical dimensions and provides installation/service clearance requirements for the unit.
Provides step-by-step instructions for installing the unit on a ground-level pad.
Covers electrical connections, grounding, power wiring, and disconnect switch installation.
Details branch circuit protection, wire sizing, and insulation requirements.
A checklist for verifying installation readiness before initiating cooling or heating startup.
Steps for starting, operating, and shutting down the unit in both cooling and heating modes.
A checklist to confirm unit operation, fan/compressor function, voltage, and system balance.
