Trane BAYBARO300 Series - Page 10

10
ACC-SVN156E-EN
Figure 16. Attach gasket to unit
Holes
Dimples
Holes
10
10
10
10
6. Remove shipping screw from damper assembly (item
2).
Figure 17. Remove shipping screw from damper
assembly
2
7. Attach damper assembly (item 2) to unit using ten
screws.
Figure 18. Attach damper assembly to unit
2
8. Using 10 screws, attach horizontal block-off panel (item
8) to the unit rear panel and damper assembly (item 2).
Figure 19. Attach horizontal block-off panel
2
8
Installation