18
CVHE-SVN04M-EN
Weights
Single Compressor and Duplex Chillers: Models CVHE, CVHF, CVHG CDHF, and CDHG
Table 9. Compressor and motor weights
Model NTON
CPKW
(a)
Volts Hz
Motor Weight
Compressor and Motor
Weight
lb
kg
lb
kg
CVHE
190–270 242 6600 50 2558 1160 7294 3308
230–320 287 4160 60 2530 1147 7266 3295
300–420 379 6600 50 2767 1255 8185 3712
360–500 453 6600 60 3385 1535 8803 3992
CVHF
350–485 453 6600 60 3385 1535 8013 3634
350–570 588 480 60 2803 1271 7431 3370
620–870 957 2300 60 3862 1751 9900 4490
650–910 957 2300 60 3862 1751 9900 4490
1060–1280 1228 4160 60 4559 2067 10597 4806
1070–1300 1228 4160 60 4559 2067 10714 4859
1470–1720 1340 2400 60 5196 2356 13932 6319
CVHG
480–565 489 6600 50 3794 1720 10000 4535
670–780 621 6600 50 4685 2125 11311 5130
920–1067 621 6600 50 4685 2125 12151 5511
CDHF
(b)
1500–2000 745 460 60 3460 1569 9498 4308
2100–2500 1062 460 60 4296 1948 10334 4687
3500 1340 2400 60 5196 2356 13911 6309
CDHG
(b)
1250–1750 621 6600 50 4685 2125 11311 5130
2150 621 6600 50 4685 2125 12151 5511
Note: All weights are nominal and ±10%.
(a)
Heaviest motor used; does not include the weight of the suction elbow.
(b)
For Duplex™ chillers, weights shown are for individual components; multiply by two for total component weights (for Duplex chillers only).
Table 10. Component weights
Model
Evap Shell Size
Control Panel
Purge
Oil Tank
Suction Elbow
(a)
Economizer
without Free
Cooling
Economizer
with Free
Cooling
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
CVHE 032 119 54 140 64 350 159 279 127 404 183 564 256
CVHE
CVHG
050 119 54 140 64 350 159 280 127 635 288 885 401
080 119 54 140 64 350 159 519 235 976 443 1296 588
CVHF
050 119 54 140 64 350 159 280 127 420 191 670 304
080 119 54 140 64 350 159 519 135 735 333 1055 479
142/210/250
119 54 140 64 350 159 722 327 878 398 1348 611
CVHG
142/210
119 54 140 64 350 159 722 327 1433 650 1903 863
CDHF
(b)
210/250D/250M/250X
119 54 140 64 350 159 683 310 878 398 1348 611
CDHG
210/250
119 54 140 64 350 159 1350 612 1433 650 1903 863
Note: All weights are nominal and ±10%.
(a)
Suction elbow weights include flanges and assume largest compressor available for that size.
(b)
For Duplex chillers, weights shown are for individual components; multiply by two for total component weights (for Duplex chillers only)
DDiimmeennssiioonnss aanndd WWeeiigghhttss
To Next Page
Loading...
