Trane Horizon OADG Series User Manual

Unit Weight and Rigging
OAU-SVX007A-EN 71
Figure 106. Rigging (continued)
SCALE 1 : 12
DETAIL C
LIFTING POINTS
(4 LOCATIONS)
SPREADER BARS
LENGTH
WIDTH
4-point lift
Model: OAK
and OAN
SPREADER BARS
LENGTH
WIDTH
SCALE 1 : 12
DETAIL A
LIFTING POINTS
(6 LOCATIONS)
6-point lift
Model: OAK
and OAN
DETAIL A
SCALE 1 : 12
LIFTING POINTS
(8 LOCATIONS)
SPREADER BARS
LENGTH
WIDTH
8-point lift
Model: OAK
and OAN
Figure 106. Rigging (continued)
LENGTHWIDTH
DETAIL A
SCALE 1 : 12
SCREW PIN SHACKLE
4 LOCATIONS
SPREADER BARS
A
NOTE: TO PREVENT DAMAGE AND/OR INJURY, ANY
FIELD-INSTALLED PIPE CHASE ON A CHILLED WATER UNIT
MUST NOT BE INSTALLED UNTIL AFTER THE UNIT
HAS BEEN LIFTED INTO PLACE.
LENGTHWIDTH
DETAIL A
SCALE 1 : 12
SCREW PIN SHACKLE
6 LOCATIONS
NOTE: TO PREVENT DAMAGE AND/OR INJURY, ANY
FIELD-INSTALLED PIPE CHASE ON A CHILLED WATER UNIT
MUST NOT BE INSTALLED UNTIL AFTER
THE UNIT
HAS BEEN LIFTED INTO PLACE.
SPREADER BARS
A
LENGTHWIDTH
NOTE: TO PREVENT DAMAGE AND/OR INJURY, ANY
FIELD-INSTALLED PIPE CHASE ON A CHILLED WATER UNIT
MUST NOT BE INSTALLED UNTIL AFTER
THE UNIT
HAS BEEN LIFTED INTO PLACE.
SPREADER BARS
DETAIL A
SCALE 1 : 15
SCREW PIN SHACKLE
4 LOCATIONS

Trane Horizon OADG Series Specifications

General

Brand	Trane
Model	Horizon OADG Series
Category	Heat Pump
Language	English