Fan belt broken
Variable
name:
SNVT
type:
State: Value: Command:
nvoBrokenbelt SNVT_switch 0 (False) Any Fan belt not broken
1 (True) Any Fan belt broken
This variable indicates whether the fan belt is intact or broken (indicated by bit 8 in Warning Word 2).
Alarm Flag
Variable
name:
SNVT
type:
State: Value: Command:
nvoAlarm SNVT_switch 0 (False) 0 No alarm(s) present
1 (True) 100 Alarm(s) present
This variable indicates whether any alarm is present.
Warning Flag
Variable
name:
SNVT
type:
State: Value: Command:
nvoWarning SNVT_switch 0 (False) 0 No warning(s) present
1 (True) 100 Warning(s) present
This variable indicates whether any warning is present.
Alarm Word
Variable
name:
SNVT
type:
State:
nvoAlarmword SNVT_state_64 Boolean 1 bit x 64
This variable contains the complete alarm word.
For more detailed information on the alarm word, please refer to the
Troubleshooting
section of this manual.
Please note that in the representation of the alarm word in the LonMaker browser, the Least Significant Bit
(LSB) is to the far left.
Configuration of the system
TR200 LonWorks 5-11
To Next Page
Loading...