10 MS-SVU0013-EN
DRY Mode
-Press Mode button to select the
operation mode.
- will be shown on the display when
DRY mode is selected.
-Press either or button to set the
desired temperature between 15ºC to
30ºC.
-Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto, Low, Medium, and High
respectively
Note:
• In DRY mode, if the compressor stops
working, fan motor and SWEEP
function will be stopped; fan motor and
SWEEP function will operate when
compressor operates.
• ECONO mode can not be activated
during DRY mode operation.
CLOCK Setting
-Press MENU button and select CLOCK
setting by pressing either or .
-Press MENU button again to set clock
and will be shown on the display with
blinking hour number.
-Press either or button to set the
clock to the present hour.
-Press MENU button again to confirm
hour setting and minute number will be
blinking.
-Press either or button to set the
clock to the present minute.
-Press MENU button again to confirm
minute setting; hour and minute number
will stop blinking and the set time will
be shown on the display.
Note:
• If there are no other buttons pressed
within 15 seconds, clock setting will be
cancelled.
Timer Operation
Once you select the timer operation, the
settings are saved in the control.
Thereafter, the air-conditioner will start
operating under the same conditions when
you simply push the POWER button on the
control.
ON TIMER Setting
You can set ON TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
-Press MENU button and select ON
TIMER setting by pressing either
or .
-Press Menu button again to set ON
TIMER and ON symbol will be shown
on the display with blinking hour
number.
-Press either or button to set the
desired hour.
-Press MENU button again to confirm
hour setting and minute number will be
blinking.
-Press either or button to set the
desired minute.
-Press MENU button again to confirm
minute setting. Hour and minute
number will stop blinking. The unit is
now standby for starting air-conditioner
automatically at the set time.
-To cancel ON TIMER, select ON TIMER
setting and press MENU button again.
Note:
• If there are no other buttons pressed
within 15 seconds, ON TIMER will be
cancelled, and the LCD display will
return to show clock.
• After selecting ON TIMER setting, the
LCD display will show the last on timer
set by user with blinking hour number.
•When ON/OFF TIMER is set, the
present time is not displayed.
• In case of power failure, ON TIMER will
be automatically cancelled as there is
no electricity in the air-conditioner.
OFF TIMER Setting
You can set OFF TIMER to start the unit
automatically at any desired time up to
24 hours as real time.
-Press MENU button and select OFF
TIMER setting by pressing either
or .
-Press Menu button again to set OFF
TIMER and OFF symbol will be shown
on the display with blinking hour
number.
-Press either or button to set the
desired hour.
-Press MENU button again to confirm
hour setting and minute number will be
blinking.
-Press either or button to set the
desired minute.
-Press MENU button again to confirm
minute setting. Hour and minute
number will stop blinking. The unit is
now standby for starting air-conditioner
automatically at the set time.
-To cancel OFF TIMER, select OFF
TIMER setting and press MENU button
again.
Note:
• If there are no other buttons pressed
within 15 seconds, OFF TIMER will be
cancelled, and the LCD display will
return to show clock.
• After selecting OFF TIMER setting, the
LCD display will show the last off timer
set by user with blinking hour number.
•When ON/OFF TIMER is set, the
present time is not displayed.
• In case of power failure, OFF TIMER will
be automatically cancelled as there is
no electricity in the air-conditioner.
TURBO Mode
TURBO mode rapidly maximizes the
cooling capacity in COOL or DRY mode.
With this simply mode, the user can easily
get the maximum cooling capacity and
comfort.
-Press MENU button and select TURBO
mode setting by pressing either
or .
- The air-conditioner will accelerate
capacity up totally 20 minutes or until
room temperature is lower than 18ºC.
Digital Wired Control
Auto –> Low –> Medium –> High
A
MS-SVU0013-EN.p65 20/7/2007, 11:52AM10
To Next Page
Loading...