EasyManua.ls Logo

Trane New Stylus MCX 512 GB - Wireless Remote Control; Remote Control Buttons and Functions; Battery Installation and Care

Trane New Stylus MCX 512 GB
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
MS-SVU0013-EN
Infrared Remote Control
Name and function of buttons
1. Infrared Signal Transmitter
Transmits the signal to indoor unit.
2. POWER Button
Press this button to start unit operation.
Press this button again to stop unit
operation.
3. Temperature Setting Button
TEMP : Press this button to increase
the set temperature.
TEMP : Press this button to decrease
the set temperature.
4. FAN SPEED Button
Press this button to select fan speed.
5. MODE Button
Press this button to select system
operation mode. In cooling only system,
a mode is selected in sequence as FAN,
COOL, DRY, and back to FAN.
6. LOUVER Button
Press this button to adjust blade
direction.
7. SWEEP Button
Press this button to activate or
inactivate sweep motor to distribute air
flow.
8. FRONT BLADE Button
Press this button to activate or
inactivate front blade function.
9. ON TIMER Button
Press this button to set the on timer of
the unit operation.
10. OFF TIMER Button
Press this button to set the off timer
of the unit operation.
11. CLOCK Button
Press this button to set the clock to
the present time or see the present
time after ON or OFF TIMER was set.
Wireless Remote Control
2
3
5
6
7
8
10
11
12
13
14
15
16
1
4
9
12. LIGHT Button
Press this button to turn on the LCD
light.
13. POWERCOOL Button
Press this button to accelerate
capacity up.
14. ECONO Button
Press this button to save energy.
15. SLEEP Button
Press this button to control
temperature while sleeping and
press this button again to cancel.
16. SEND Button
Press this button to confirm the
operation of the unit according to
the LCD display or press and hold
for 5 seconds to toggle
temperature unit between Celsius
and Fahrenheit.
Installation of Batteries
1. Slide the back cover of the remote
control down to take it off.
2. Insert two dry batteries into the slot. Be
sure that the + and – directions are
correct.
3. Fix the back cover to the remote control
as before.
Attentions
Batteries can be used approximately for
one year under normal conditions.
Always replace an identical type of two
batteries at the same time.
Do not use manganese dry batteries
since they may cause a malfunction.
Do not use rechargeable (Ni-Cd)
batteries, because such batteries may
differ from standard dry cell batteries
in shapes, dimensions, or performance.
•Take out all batteries if you are not going
to use the air-conditioner for a long
period of time.
MS-SVU0013-EN.p65 20/7/2007, 11:51AM5

Related product manuals