EasyManua.ls Logo

Trane Odyssey TTA0724 A Series User Manual

Trane Odyssey TTA0724 A Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2020
SSSS--SSVVXX000011AA--EENN
Installation, Operation, and Maintenance
Split System Air Conditioners
Odyssey with Symbio
Controls
Cooling Condenser, R-410A 5 to 25 Tons and
R-22 Dry Charge 7.5, 10, 15 and 20 Tons
((6600 HHzz))
TTA0724*A/D
TTA0904*A/D
TTA1204*C/D
TTA1504*D
TTA1804*C/D
TTA2404*C/D
TTA3004*C
TTA0902*A
TTA1202*A
TTA1802*D
TTA2402*D
((5500 HHzz))
TTA0604DA/D
TTA0764DA/D
TTA1014DC/D
TTA1264DD
TTA1564DC/D
TTA2014DC/D
TTA2514DC
Question and Answer IconNeed help?

Do you have a question about the Trane Odyssey TTA0724 A Series and is the answer not in the manual?

Trane Odyssey TTA0724 A Series Specifications

General IconGeneral
ModelTTA0724
RefrigerantR-410A
Compressor TypeScroll
Voltage208/230V
Phase3
TypeAir Conditioner
SeriesOdyssey A Series
SEER RatingNot Applicable

Summary

Introduction and Safety

Introduction Overview

Manual introduction and basic safety advisories.

Critical Safety Warnings

Key warnings on wiring, PPE, EHS, and refrigerant hazards.

Unit Identification and Specifications

Model Number Description

Breakdown of model number digits for TTA units.

Dimensional Data and Weights

Physical dimensions and weight information for unit models.

Installation Procedures

Pre-Installation Steps

Unit inspection, mounting, and initial checks.

Refrigerant System Installation

Piping guidelines, procedures, evacuation, and charging.

Electrical Wiring and Controls

Power supply, Symbio controls, and field wiring.

Operation and Maintenance

Troubleshooting and Service Test Mode

Guidance for diagnosing issues and using test modes.

Maintenance Procedures

Schedules and steps for routine unit maintenance.

Support and Warranty

Charging Data and Wiring Diagrams

Tables for charging, curves, and wiring matrix.

Warranty Information

Warranty terms, coverage, exclusions, and limitations.

Related product manuals