EasyManua.ls Logo

Trane Odyssey TWE1504*B User Manual

Trane Odyssey TWE1504*B
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
March 2020
SSSSAA--SSVVXX0066HH--EENN
Installation, Operation, and Maintenance
Split System Air Conditioners
Odyssey™ with Symbio™
Controls
Air Handler 5 to 25 Tons
MMooddeell ((6600 HHzz))
TWE0604*A/B
TWE0724*B
TWE0904*A/B
TWE1204*A/B
TWE1504*B
TWE1804*B
TWE2404*B
TWE3004*B
MMooddeell ((5500 HHzz))
TWE0514DA
TWE0724DB
TWE0764DA/B
TWE1014DA/B
TWE1264DB
TWE1564DB
TWE2014DB
TWE2514DB

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Trane Odyssey TWE1504*B and is the answer not in the manual?

Trane Odyssey TWE1504*B Specifications

General IconGeneral
Model NumberTWE1504*B
CategoryAir Conditioner
Energy Efficiency Ratio (EER)11.0
RefrigerantR-410A
Operating Temperature Range (Cooling)115°F
Power Supply208/230V, 1-phase, 60Hz

Summary

Introduction and Safety

Safety Advisories and Precautions

Defines safety advisories and mandates PPE usage and EHS policy adherence.

Hazard Specific Warnings

Warns about specific hazards like refrigerant high pressure and potential explosion risks during operation.

Model Number Description

Pre-Installation Procedures

Unit Inspection and Initial Checks

Outlines steps for inspecting the unit for damage, testing for leaks, and safe lifting practices.

Dimensional Data

Installation

Electrical Wiring and Grounding

Provides critical instructions for safe and compliant electrical wiring, grounding, and power supply connections.

Symbio Controls Wiring and Installation Checklist

Details Symbio control wiring requirements and provides a checklist for verifying installation completion.

Field Wiring

Field Wiring Instructions by Pairing

A table and detailed instructions for field wiring different types of Symbio and Legacy condensers with air handlers.

Startup

SZVAV/Two-Speed Units Configuration

Guides on configuring Symbio 700 controller for SZVAV and two-speed air handler systems.

Editing Equipment Configuration

Illustrates steps within the mobile app to edit equipment configuration settings, including system type and fan speed.

SZVAV System Type Configuration

Provides steps to configure the Symbio 700 for SZVAV air handler systems by selecting the correct system type.

Field Installed Electric Heat Kit Configuration

Guides on configuring the Symbio 700 controller for field-installed electric heat kits, including control sequences.

Electric Heat as Secondary Heat Configuration

Details the configuration steps for setting electric heat as the secondary heating source in heat pump systems.

Maintenance

Maintenance Log

Wiring Diagram Matrix and Device Location

Related product manuals