To Next PageTo Next Page
Need help?Do you have a question about the Trane Odyssey TWE1804*B and is the answer not in the manual?
General| Model | TWE1804*B |
|---|---|
| Voltage | 208/230V |
| Phase | 1 |
| Cooling Capacity | 18000 BTU/h |
| Weight | 220 lbs |
| Power Supply | 208/230V, 1 Phase, 60 Hz |
| Weight (Outdoor Unit) | 220 lbs |
Emphasizes the need for qualified personnel for safe electrical wiring.
Stresses the importance of wearing appropriate PPE for safety.
Requires adherence to company and local EHS policies for safety.
Warns about the hazards of high-pressure refrigerant systems.
Alerts to explosion risks from bypassing safeties or improper compressor control.
Provides safety precautions and guidelines for lifting the air handler unit.
Combines warnings for hazardous voltage, capacitors, wiring, and grounding.
Details the steps to change the motor's voltage connection.
Explains how to reorient the evaporator coil for vertical upflow installation.
Covers installation considerations, limitations, and best practices.
Details how to suspend the unit using mounting kits and isolators.
Advises on attaching expansion valve bulbs and insulating suction lines.
Details condensate connection requirements and drain trap assembly.
Provides instructions for replacing air filters in the unit.
Guides on connecting supply and return ducts to the unit.
Explains how to set airflow options for the unit.
Details electrical wiring procedures and safety precautions.
Instructs on providing line voltage to the unit and installing disconnect switches.
Covers wiring and setup for Symbio controls.
Details wiring configurations for different condenser/air handler pairings.
Provides instructions for adjusting fan belt tension and related safety.
Combines warnings for hazardous voltage and operating under vacuum.
Repeats warnings and PPE requirements for fiberglass wool.
