Trane P0V0A000M30SCA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
November 2021
1188--GGEE2200DD11--11EE--EENN
Modular Blowers – No Heat
P0V0A000M30SCA
P0V0B000M40SCA
P0V0C000M50SCA
P0V0D000M50SCA
The P0V0 series modular blower is designed for installation
in a closet, utility room, alcove, basement, crawlspace or
attic. These versatile units are applicable to air conditioning
and heat pump applications. Several models are available
to meet the specific requirements of the outdoor
equipment.
Installer’s Guide

Trane P0V0A000M30SCA Specifications

General

Brand	Trane
Model	P0V0A000M30SCA
Category	Blower
Language	English

Summary

Safety Section

General Safety Warnings

Summarizes critical safety warnings and cautions for installation and operation.

Features and Accessories

Installation Instructions

Unpacking and Location Requirements

Ducting, Wiring, and Filters

General Installation

Supply Duct Connections

Return Duct Connections and Filters

Electrical Connections

Field Wiring Diagrams

Wiring diagrams for single/two-stage cooling and heat pump systems.

Communicating Controls Wiring

Wiring schematic for communicating controls with non-communicating modular blowers.

Integrated Modular Blower Control Menu

Control System Menu Setup

Guide to setting up the control system menu and adjusting parameters.

Run Test Mode

IMBC Display Codes and Fault Recovery

IMBC Display Codes

Lists and explains various display codes for the IMBC system.

Fault Code Recovery Procedures

Checkout Procedures