Trane P0V0B000M40SCA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
November 2021
1188--GGEE2200DD11--11EE--EENN
Modular Blowers – No Heat
P0V0A000M30SCA
P0V0B000M40SCA
P0V0C000M50SCA
P0V0D000M50SCA
The P0V0 series modular blower is designed for installation
in a closet, utility room, alcove, basement, crawlspace or
attic. These versatile units are applicable to air conditioning
and heat pump applications. Several models are available
to meet the specific requirements of the outdoor
equipment.
Installer’s Guide

Trane P0V0B000M40SCA Specifications

General

Brand	Trane
Model	P0V0B000M40SCA
Category	Blower
Language	English

Summary

Safety Section

Features and Accessories

Location and Clearances

Installation Instructions

Outline Drawings

General Installation

Panel Removal

Instructions for removing the front panel and shipping bracket.

Horizontal Installation in an Attic or Crawlspace

Guidance for installing the modular blower horizontally in attics or crawl spaces.

Duct Connections

Procedures for connecting supply and return ductwork to the modular blower.

Return Air Filters

Information on selecting and installing appropriate external air filters for the modular blower.

Electrical Connections

Field Wiring

Wiring diagrams and instructions for connecting the modular blower to the thermostat and outdoor unit.

Integrated Modular Blower Control Menu

Integrated Modular Blower Control (IMBC) Display Codes

Fault Code Recovery

Sequence of Operation

Checkout Procedures