Trane P0V0A000M30SDA User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
May 2023
PP00VV00--SSVVXX000011--11AA--EENN
Modular Blowers – No Heat
P0V0A000M30SDA
P0V0B000M40SDA
P0V0C000M50SDA
P0V0D000M50SDA
The P0V0 series modular blower is designed for installation
in a closet, utility room, alcove, basement, crawlspace or
attic. These versatile units are applicable to air conditioning
and heat pump applications. Several models are available
to meet the specific requirements of the outdoor
equipment.
WARNING
FIRE HAZARD!
Failure to follow this Warning could result in property damage, severe personal
injury, or death.
This Warning applies to installations with a ammable refrigeration system.
The furnace must be powered except for service. The furnace shall be installed
and connected according to installation instructions and wiring diagrams that
are provided with the evaporator coil.
Installation, Operation, and Maintenance

Trane P0V0A000M30SDA Specifications

General

Brand	Trane
Model	P0V0A000M30SDA
Category	Blower
Language	English

Summary

SAFETY SECTION

Hazardous Voltage Warning

Warning about hazardous voltage and proper procedures.

Grounding Requirements

Importance of grounding for safety and equipment protection.

Live Electrical Components Precautions

Precautions when working with live electrical components.

Improper Voltage Connection Caution

Installation Instructions

Wiring Instructions

Instructions for field wiring connections according to codes.

Operational and Checkout Procedures

Procedures for operation and checkout after installation.

Maintenance Guidelines

Regular maintenance tasks for the modular blower.

Wiring Diagram

General Installation

Horizontal Installation Methods

Duct Connections

Instructions for connecting supply and return ductwork to the blower.

Return Air Filter Installation

Guidelines and procedures for installing return air filters.

Electrical Connections

Procedures for making electrical connections to the unit.

Field Wiring Diagrams

Diagram and notes for field wiring connections.

Communicating Controls Wiring

Integrated Modular Blower Control Menu

Integrated Modular Blower Control (IMBC) Display Codes

Modular Blower Display Codes

Codes displayed by the modular blower control.

Error Codes Explanation

Explanation of various alarm error codes.

Fault Code Recovery Procedures

Troubleshooting

Getting Started Flowchart

01 Fault Code Troubleshooting

06 Fault Code Reversed Polarity

06 Fault Code Faulty Ground

12 Fault Code Troubleshooting

13 Fault Code Troubleshooting

14 Fault Code Troubleshooting

15 Fault Code Troubleshooting

17 Fault Code Troubleshooting

18 Fault Code Troubleshooting

Serial Motor Troubleshooting

Sequence of Operation

Single Stage Cooling Operation

Two Stage Cooling Operation

Single Stage Heat Pump Operation

Two Stage Heat Pump Operation

Periodic Servicing Requirements

Checkout Procedures