38
P0V0-SVX001-1A-EN
Periodic Servicing Requirements
1. GENERAL INSPECTION – EExxaammiinnee tthhee mmoodduullaarr
bblloowweerr iinnssttaallllaattiioonn aannnnuuaallllyy ffoorr tthhee ffoolllloowwiinngg
iitteemmss::
2. FILTERS – Filters should be cleaned or replaced
(with high velocity filters only), monthly and more
frequently during high use times of the year such as
midsummer or midwinter.
3. BLOWERS – The Blower size and speed determine
the air volume delivered by the Modular Blower.
The Blower motor bearings are factory lubricated
and under normal operating conditions do not
require servicing. Annual cleaning of the Blower
wheel and housing is recommended for maximum
air output, and this must be performed only by a
qualified servicer or service agency.
4. COOLING COIL CONDENSATE DRAIN - If a cooling
coil is installed with the Modular Blower,
condensate drains should be checked and cleaned
periodically to assure that condensate can drain
freely from coil to drain. If condensate cannot drain
freely water damage could occur.
To Next Page
Loading...
Need help?
General
