CLCH-SVX08C-EN 5
Introduction
Overview of Manual
Use this manual to install, startup, operate, and maintain
the Performance Climate Changer™ air handler gas heat
section. Carefully review the procedures discussed in this
manual to minimize installation and startup difficulties.
Nameplate
Each air handler section includes a nameplate/label (see
Figure 1), which identifies the type of section, customer
tagging information, the unit serial number, the unit order
number, the build-section position for installation, and the
unit model number.
Note: The unit serial number and order number is
required when ordering parts or requesting service
for a Trane air handler
.
Figure 1. Performance air handler section nameplate
Note: Reference burner nameplate for recommended gas manifold pressure at startup.
To Next Page
Loading...
