ACC-SVN240A-EN 13
Installation
7. Move to the rear of the unit. First, ensure the temperature sensing module assembly matches
Figure 13. Place the sensor assembly over the sensor tube. Secure sensor assembly to sensor
tube with the single screw. Verify that insulation is installed around the temperature sensing
assembly with a wire tie. See Figure 14.
Figure 12. For model: D cabinet (digit 39 = D) horizontal installation
Sensing tubes
Mounting bracket
Figure 13. For model: D cabinet (digit 39 = D) sensor temperature sensing module installation
Temperature sensing
module
Use temperature sensing module
screw to attach to the sensor tube
To Next Page
Loading...