Trane R Series - Page 46

46 RLC-SVX07A-EN
Installation - Remote Condenser
RESTRICTIONS:
• Total distance between components should not exceed 200 ft. (actual) or 300 ft. (equivalent).
• Elevation difference greater than 100 ft. (actual) will result in at least a 2% efficiency decrease.
Figure 24 Condenser Above the Compressor /Chiller
&RQGHQVHU&RLO
;
;
;
6HUYLFH
9DOYH
)LOWHU
'ULHU
6LJKW
*ODVV
(;9
7UDS
,QYHUWHG7UDS
+HLJKW(TXDOWR
7RSRI&RQGHQVHU
RESTRICTIONS:
• Total distance between components should not exceed 200 ft. (actual) or 300 ft. (equivalent).
• Liquid line riser(s) must not exceed 15 ft. from base of air cooled condenser.
Figure 25 Condenser Below Compressor/ Chiller
&RQGHQVHU&RLO
;
;
;
6HUYLFH
9DOYH
)LOWHU
'ULHU
6LJKW
*ODVV
(;9
7UDS