RTAC-SVX002A-EN 5
General Information
Fig. II - 01 - Typical RTAC Unit
Chilled water inlet and outlet openings
are covered for shipment. Each
compressor has a separate compressor
motor starter. The RTAC series features
Trane’s exclusive Adaptive Control
™ logic, which monitors the control
variables that govern the operation of
the chiller unit. Adaptive Control logic
can adjust capacity variables to avoid
chiller shutdown when necessary,
and keep producing chilled water.
The units feature two independent
refrigerant circuits. Compressor
unloaders are solenoid actuated and
oil pressure operated. Each refrigerant
circuit is provided with lter, sight
glass, electronic expansion valve,
and charging valves. The shell-and-
tube type evaporator is manufactured
in accordance with ASME standards
or other international codes. Each
evaporator is fully insulated and is
equipped with water drain and vent
connections. Packaged units have heat
tape protection to - 20°F (-28.9°C) as
standard. As an option, a convenience
outlet can be supplied.
Control Panel
To Next Page
Loading...
Need help?
General