Do you have a question about the Trane S8B1A026M2PSC and is the answer not in the manual?
Model Number | S8B1A026M2PSC |
---|---|
Category | Furnace |
Type | Gas |
Efficiency | 80% AFUE |
Blower Motor | PSC |
Ignition | Hot Surface Ignition |
Heat Exchanger | Aluminized steel |
Fuel Type | Natural gas |
Output BTU/h | 26, 000 BTU/h |
Stages | Single Stage |
Warranty | 10-Year Limited Warranty on Heat Exchanger, 5-Year Limited Warranty on Parts |
Lists single-stage furnace models by configuration.
Lists two-stage furnace models by configuration.
Critical warnings about fire, explosion, electrical shock, and CO risks.
Precautions for installation, chemical exposure, and general hazards.
Warnings on overheating, voltage, corrosion, and equipment damage.
Cautions for sharp edges, freeze protection, service, and wiring.
Performance data including BTUH, temp rise, and blower specs.
Details on combustion fan, vent pipe, and heat exchanger.
Crucial safety steps for installation, servicing, and operation.
Specifies minimum clearances for safe furnace placement.
Guidelines for gas piping connections and venting options.
Diagrams for thermostat and outdoor unit connections.
Wiring configurations for dual furnace installations.
Data on airflow (CFM) vs. external static pressure.
Procedure for adjusting blower speed taps for optimal airflow.
Navigating menus, understanding system status, and modes.
Explains menu options, status, and error codes.
Index of common fault codes and troubleshooting steps.
Initial diagnostic steps and IFC-related fault codes.
Diagnosing problems with pressure switches and flame sensors.
Step-by-step operation during gas heating modes.
Operation sequences for cooling and heat pump modes.
Annual checks for flue products, vents, and structural integrity.
Procedures for cleaning burners and inspecting the heat exchanger.