EasyManuals Logo

Trane S8B1B080M4PSAB User Manual

Trane S8B1B080M4PSAB
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
18-CE14D1-1A-EN
11
6. Allow sufficient height in supply plenum above the
Furnace to provide for cooling coil installation, if
the cooling coil is not installed at the time of this
Furnace installation.
7. The Furnace shall be installed so electrical
components are protected from water.
8. If the Furnace is installed in a garage, it must be
installed so that the burners, and the ignition
source are located not less than 18 inches above the
floor and the Furnace must be located or protected
to avoid physical damage from vehicles.
9. The gas furnace must not be located where
excessive exposure to contaminated combustion
air will result in safety and performance related
problems. Avoid the following known
contaminants:
a. Permanent wave solutions
b. Chlorinated waxes and cleaners
c. Chlorine based swimming pool chemicals
d. Water softening chemicals
e. De-icing salts or chemicals
f. Carbon tetrachloride
g. Halogen type refrigerants
h. Cleaning solvents (such as
perchloroethylene)
i. Printing inks, paint removers, varnishes, etc.
j. Hydrochloric acid
k. Cements and glues
l. Antistatic fabric softeners for clothes dryers
m. Masonry acid washing materials
FFuurrnnaaccee IInnssttaallllaattiioonn GGuuiiddeelliinneess

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trane S8B1B080M4PSAB and is the answer not in the manual?

Trane S8B1B080M4PSAB Specifications

General IconGeneral
BrandTrane
ModelS8B1B080M4PSAB
CategoryFurnace
LanguageEnglish

Related product manuals