Trane S8X2B060M4PSC User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
May 2022
SS88XXBB--SSVVXX000011--11AA--EENN
Upflow/Downflow/Horizontal
Gas-Fired, 1–Stage and 2–Stage Induced Draft Furnaces with
High Efficiency Motor
UUppffllooww,, DDoowwnnffllooww,, HHoorriizzoonnttaall RRiigghhtt//LLeefftt
Single Stage Two Stage
S8B1
S8X1
S8X2
S8B1A026M2PSC
S8B1A040M3PSC
S8B1B040M2PSC
S8B1B060M4PSC
S8B1B080M4PSC
S8B1C080M5PSC
S8B1C100M5PSC
S8B1D120M5PSC
S8X1A026M2PSC
S8X1A040M3PSC
S8X1B040M2PSC
S8X1B060M4PSC
S8X1B080M4PSC
S8X1C080M5PSC
S8X1C100M5PSC
S8X1D120M5PSC
S8X2A040M3PSC
S8X2B060M4PSC
S8X2B080M4PSC
S8X2C080M5PSC
S8X2C100M5PSC
S8X2D120M5PSC
NNoottee:: This Installation, Operation, and Maintenance is used for multiple furnace
families. Models may have a “T” in the 12th digit designating they meet
California less than 40 ng/J (NOx) emissions requirements.
NNoottee:: Graphics in this document are for
representation only. Actual model may
differ in appearance.
S8XB-SVX001-1A-EN
Installation, Operation, and Maintenance

Trane S8X2B060M4PSC Specifications

General

Model Number	S8X2B060M4PSC
Category	Furnace
Type	Gas
Heating Capacity	60, 000 BTU
Efficiency Rating	80% AFUE
Stages	Single Stage
Blower Motor	Multi-speed
Fuel Type	Natural Gas
Input BTU	60, 000 BTU
Output BTU	48, 000 BTU
Ignition	Hot Surface Ignition
Warranty	10 years limited

Summary

Safety Section

Fire and Explosion Hazards

Discusses risks of fire and explosion from gas and operations.

Carbon Monoxide Hazards

Details risks of CO poisoning and venting issues.

Electrical Safety Precautions

Covers electrical shock risks and necessary precautions.

Product Specifications

Model Ratings and Performance

Key performance data for furnace models including BTUH and AFUE.

Blower and Fan Specifications

Details on blower motor, RPM, and combustion fan specs.

Furnace Installation Guidelines

Safety Practices and Precautions

Crucial safety steps for installation and servicing.

Locations and Clearances

Requirements for furnace placement and surrounding clearances.

Wiring Diagrams

S8B1/S8X1 Single Stage Field Wiring

Field wiring for S8B1/S8X1 models, including thermostat connections.

S8X2 Two Stage Field Wiring

Field wiring for S8X2 models, including thermostat connections.

Furnace General Installation

Furnace Panel Removal

Instructions for removing furnace front panels.

Gas Piping Procedures

Instructions for connecting gas lines and valve adjustments.

Duct Connections

Guidance on connecting supply and return air ducts.

Troubleshooting

IFC Component Layout and Error Codes

Identifies IFC components and lists error code explanations.

Fault Code Troubleshooting Flowcharts

Step-by-step guides for diagnosing system faults.

Periodic Servicing Requirements

General Inspection and Cleaning

Annual checks for vent, filters, blower, igniter, and burners.