To Next PageTo Next Page
Need help?Do you have a question about the Trane S8X2C080M5PSC and is the answer not in the manual?
General| Model | S8X2C080M5PSC |
|---|---|
| Type | Gas Furnace |
| Heating Capacity | 80, 000 BTU |
| Efficiency Rating | 80% AFUE |
| Blower Motor | Variable Speed |
| Stages | Single Stage |
| Fuel Type | Natural Gas |
| Ignition | Hot Surface Ignition |
| Heat Exchanger | Aluminized Steel |
| Warranty | 10-Year Limited Warranty on Heat Exchanger, 5-Year Limited Warranty on Parts |
Key warnings regarding fire and explosion risks from gas and electrical hazards.
Safety advice concerning electrical hazards and their consequences.
Precautions and warnings related to carbon monoxide risks.
Essential safety practices for furnace installation, servicing, and operation.
Instructions and diagrams for proper gas piping installation.
Procedure for verifying combustion and input rates for furnace operation.
Steps for adjusting the gas valve manifold pressure for correct operation.
Instructions for adjusting furnace input rate for high altitude installations.
Requirements for adequate airflow for combustion and ventilation.
Instructions for making proper electrical connections to the furnace unit.
Diagrams illustrating field wiring for thermostats and outdoor units.
Checking and adjusting limit switches and other controls.
Menu structure and settings for the S8B1/S8X1 single stage control system.
Procedure for changing factory default values and system settings.
Menu structure and settings for the S8X1 two stage control system.
Menu structure and settings for the S8X2 single stage control system.
Steps for entering and executing the furnace run test mode.
Steps to view, clear, and recover from fault codes.
Index of troubleshooting flowcharts for furnace issues.
Initial troubleshooting steps for common furnace issues.
Diagnostic steps for fault code 2.1 related to gas pressure.
