TK 56321-18-IM-EN
11
AALLLL MMOODDEELLSS - The oil separator and the dehydrator must be removed to access refrigeration fittings that hoses will be
attached to later.
NNoottee:: For nosemount or rooftop installations that may require the harness be re-routed from exiting the bottom of the
condenser, first remove the wires with ring terminals from the three (3) ground studs to avoid damaging them.
Apply dielectric grease to ground studs and re-connect ground wires after relocating harness.
PPrreeppaarriinngg CCoonnddeennsseerr ffoorr IInnssttaallllaattiioonn
To Next Page
Loading...
