TK 56321-18-IM-EN
7
Engine Driven Compressor Installation
IImmppoorrttaanntt:: See Section 5 - Compressor Selection and Installation Standards in the Thermo King Vehicle Powered Truck
Installation Standards and Procedures Guide (TK 56430). THESE PROCEDURES MUST BE FOLLOWED!
IImmppoorrttaanntt:: Failure to add the correct amount and type of oil will damage the compressor! Refer to “Compressor Oil
Requirements,” p. .
IImmppoorrttaanntt:: It is critical that a P–trap is installed in the suction line bbeeffoorree the roadside compressor. See Section 6 –
Refrigerant Hose and Fittings Standards in the Thermo King Vehicle Powered Truck Installation Standards
and Procedures Guide (TK 56430). THESE PROCEDURES MUST BE FOLLOWED!
To Next Page
Loading...
