5
A70 UG 007 E - 0299
KEY
/ (
Outdoor temp. option):
When the outdoor temperature
option is connected to your thermo-
stat, you can display this value by
pressing the
/
key. If this
option is not connected, the thermo-
stat displays “- -“
KEY / (Day/Night):
When the thermostat is initialised,
the symbol corresponding to the
day-time temperature is displayed.
By pressing the / key or pow-
ering up the CLK1 and CLK2 termi-
nals at the back of the thermostat
(customer connection), you can
select a relief or night-time tempera-
ture . (The thermostat memorises
this temperature).
To alternate between the two tem-
perature settings simply press the
/
key.
CLOCK TERMINALS (option):
CLK1 - CLK2
If you connect a clock to these termi-
nals, the thermostat can alternate
automatically between the day/night
set point values.
REMOTE SENSOR TERMINALS
(option):
RS1-RS2-RS+V
The THS thermostat is designed to
accept an electronic remote sensor
that will enable you to place the ther-
mostat in an unobtrusive position.
°C/°F
Press the and keys simulta-
neously to change the °C /°F display.
Power cuts
One of this thermostat’s special fea-
tures is that it does not need a bat-
tery to conserve the selected set
points if a power cut occurs. Its
memory is not affected by power
cuts, no matter how long they last.
When the current returns, the ther-
mostat will continue to operate as if
the power had never been discon-
nected.
Temperature precision
The thermostat will measure the
temperature exactly once it has been
installed and powered up for at least
one hour.
To Next Page
Loading...
