To Next PageTo Next Page
Need help?Do you have a question about the Trane TTA240B series and is the answer not in the manual?
General| Series | TTA240B |
|---|---|
| Refrigerant Type | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Type | Air Conditioner |
| Cooling Capacity | 24, 000 BTU/h |
Highlights critical warnings, cautions, and regulatory compliance requirements.
A step-by-step checklist to ensure all installation requirements are met.
Guide for inspecting the unit for shipping damage and reporting discrepancies.
Instructions for performing an initial leak test on refrigerant circuits.
Standards and recommendations for refrigerant line installation and length.
Procedure for connecting refrigerant lines to the outdoor unit.
Procedure for connecting refrigerant lines to the indoor unit.
Steps to perform a thorough leak check of the refrigerant system.
Instructions for evacuating the refrigerant circuit to a specific vacuum level.
Guidelines for charging the system with the correct amount of refrigerant.
Steps for charging the system using gaseous refrigerant while the unit operates.
Instructions for proper electrical wiring and connecting the unit's power supply.
Procedures for activating and using service test modes for diagnostics.
Methods for checking system status and identifying operational issues.
