To Next PageTo Next Page
Need help?Do you have a question about the Trane TWE Series and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Series | TWE |
| Cooling Capacity | 1.5 to 5 tons |
| Type | Air Conditioner |
| Installation | Indoor |
| Warranty | 10-year limited warranty on compressor |
Records changes and updates to the manual's format and content over time.
Explains hazard symbols (Warning, Caution) and their implications for safety and equipment.
Details the alphanumeric code that identifies unit type, capacity, features, and design sequence.
Provides an overview of air handler models, features, and installation considerations.
Guides on inspecting the unit for shipping damage and verifying correct model shipment.
A checklist to verify completion of all necessary installation procedures before system startup.
Provides detailed measurements, diagrams, and weight information for various unit models.
Final positioning considerations for the air handler based on service access and connections.
Step-by-step instructions for moving the drain pan to different positions for installation flexibility.
Guidelines for preparing and connecting refrigerant lines, including conversion for different entry sides.
Important considerations for installation, including clearances, ductwork, and piping insulation.
Safety guidelines and procedures for properly lifting and supporting the air handler unit.
Instructions for leveling the unit and installing an auxiliary drain pan for condensate management.
Details on connecting the condensate drain line, including trap requirements and materials.
Instructions on filter installation, replacement, and conversion for different filter sizes.
Guidelines for connecting supply and return ducts using flame retardant connectors.
Information on setting the unit for nominal airflow and selecting proper drive packages.
Requirements for electrical connections, grounding, and wiring according to codes.
A checklist to verify field wiring connections and ensure operational readiness before system startup.
Guidelines for connecting thermostats and low voltage control wiring to the unit.
Wiring configurations for specific 7½ and 10-ton single-circuit air handler models.
Wiring configurations for specific 10-ton dual-circuit air handler models.
Wiring configurations for specific 5-ton single-circuit air handler models.
Wiring configurations for twin unit setups involving TT_060 and TW_030/TW_060 models.
Specific wiring diagrams for 7½ and 10-ton single-circuit air handler models.
Specific wiring diagrams for 7½ and 10-ton single-circuit air handler models.
Specific wiring diagrams for 15 and 20-ton dual-circuit air handler models.
Specific wiring diagrams for larger commercial air handler models.
Details the warranty coverage for parts and sealed motor-compressors for air conditioner units.
Specifies warranty terms for commercial equipment rated 20 tons and larger.
