2 18-HD64D1-1
2.1 Overview
2.2 Contents in Box
2.3 Specifications
Specification Description
Product Model: TZONE950AC52ZA
Product: ComfortLink II Thermostat
Size: 7.3” width x 4.3” height x 1.2” depth
Storage Temperature -40°F to 175°F, 5% to 95% RH non-condensing
Operating Temperature: 25°F to 126°F, 5% to 90% RH non-condensing
Input Power: 24 VAC from HVAC System (Range: 18-32 VAC)
Power Consumption: 7 VA*
Wire usage: Minimum 18 gauge NEC approved control wiring
Zone Sensor Wireless Range (802.15.4): 60 ft. through 3 standard walls
Wireless Connectivity Range (802.11 b/g): Varies with router model and placement
Communications: ComfortLink II - 3 wire connection
System Modes: Heat, Cool, Auto, Emergency Heat
Fan Modes: On, Auto, Circulate
Cooling Setpoint Temperature Range: 60°F to 99°F, 1°F resolution
Heating Setpoint Temperature Range: 55°F to 90°F, 1°F resolution
Indoor Temperature Display Range: 20°F to 119°F
Outdoor Temperature Display Range: -31°F to 119°F
Indoor Humidity Display Range: 0% to 99%, 1% resolution
Minimum Cycle Off Time Delay: Compressor: 5 minutes, Heat: 1 minute
The ComfortLink II Thermostat is a Communicating
7-inch color touch screen that provides an easy-to-
use interface to the end user.
The thermostat is a communicating wall mounted
control that allows a user to control an HVAC and
zoning system.
With the addition of the 24VAC Relay Panel, con-
ventional HVAC systems can also be controlled
and zoned.
The following parts are included in product model
TZONE950AC52ZA:
1 - Thermostat
1 - Sub-Base
3 - SnapSkru
®
Wall Achors
3 - 1” Screws
Section 2. General Information
* On every application, 24VAC loads should be reviewed to be sure the indoor unit control power transformer is adequately sized. See the Relay
Panel Installer’s Guide for guidelines.
To Next Page
Loading...
