To Next PageTo Next Page
Need help?Do you have a question about the Trane Z WAVE TZEMT400AB32MAA and is the answer not in the manual?
General| Brand | Trane |
|---|---|
| Model | Z WAVE TZEMT400AB32MAA |
| Category | Thermostat |
| Language | English |
Describes the Z-Wave enabled thermostat, its display, buttons, and sensors.
Explains how to navigate screens, including the main control screen and minimized mode.
Details the thermostat's backlit display and its adjustable settings for visibility.
Steps to add the thermostat to a Z-Wave network, including proximity and button presses.
Steps to remove the thermostat from a Z-Wave network, including proximity and button presses.
Notes on how inclusion/exclusion is initiated and power requirements.
Explains the function of soft keys, dynamic labels, and status LEDs.
Describes the graphical display, main control, minimized mode, and menu screens.
An optional screen to view and edit time-based setback schedules.
Accesses settings for clock, timeout, temp units, calibration, and display.
Displays runtime hours and allows setting Energy Savings Mode temperatures.
Submenus for Z-Wave network setup and viewing thermostat configuration details.
Shows the current temperature from the internal sensor.
Displays heating and cooling setpoints, adjustable via Up/Down buttons.
Shows the current time, which can be set in User Settings.
Adjusts heating or cooling setpoint temperature by one degree increments.
Details the functions of Off, Heat, Cool, Auto, and EHEAT system modes.
Allows selection of AUTO, ON, or CYCLE for manual fan operation.
Manages schedule running, setpoint hold, and Energy Savings Mode operations.
Describes green LEDs for system status, stage, and schedule/mode.
Details the red LED used for system alerts like filter or maintenance reminders.
Navigates the main menu, including accessing schedules and user settings.
Accesses Usage Graph, ESM Setpoints, ZWave Install, and Thermostat Info.
Allows changing individual day/hour and setpoints for Heating and Cooling schedules.
Loads a preset schedule with mild temperature setbacks.
Loads a preset schedule with deeper temperature setbacks.
Displays and allows modification of daily heating and cooling schedules.
Option to copy a day's schedule to other days or groups of days.
Configures clock, filter timer, and maintenance reminders.
Adjusts screen timeout, temperature units, sensor calibration, and display contrast.
Locks or unlocks the thermostat buttons to prevent unauthorized changes.
Configures HVAC type, fan type, changeover, and stage operations.
Adjusts temperature setpoint separation and stage activation/deactivation points.
Configures ON/OFF deltas for heating and cooling stages 2 and 3.
Sets max heat/min cool setpoints and minimum run/off times for system protection.
Configures fan cycling for ventilation, including ON and OFF times.
Details compatibility with Standard (gas/electric) and Heat Pump HVAC systems.
Explains compatibility with 2-stage heating/cooling and 3-stage heat pump systems.
Notes on compatibility with dual fuel systems and the need for a kit.
Describes Z-Wave communication capabilities for remote control.
Guides setup for Gas/Electric systems, including stage wiring.
Instructions for wiring transformers, including jumper JP1 for common/split systems.
Guides setup for Heat Pump systems, including stage wiring and changeover valve.
Instructions for wiring heat pump transformers, noting the RC/RH jumper.
Explains heating/cooling logic, setpoint delta T, and auto mode switching.
Configures the thermostat for standard Gas/Electric system operation.
Sets the fan type for Gas or Electric systems based on HVAC requirements.
Configures heat pump type and changeover valve settings for correct operation.
Sets minimum run/off times for compressor protection and cycle prevention.
Details connecting the 24VAC power from the HVAC system to the thermostat.
Instructions for wiring common or split transformer systems, including jumper JP1.
