To Next PageTo Next Page
Need help?Do you have a question about the Trane UC1B040A9241A series and is the answer not in the manual?
General| Model Number | UC1B040A9241A |
|---|---|
| Category | Furnace |
| Heating Capacity | 40, 000 BTU |
| Installation Type | Upflow/Horizontal |
| Stages | Single Stage |
| Ignition Type | Hot Surface Ignition |
| Fuel Type | Gas |
| Input BTU | 40, 000 BTU |
Provides dimensions and details for the UC1 furnace outline.
Displays dimensions and details for the DC1 furnace outline.
Details the process and requirements for installing the furnace in an upflow configuration.
Covers the procedure and considerations for installing the furnace in a downflow configuration.
Explains how to install the furnace in a horizontal orientation.
Instructions for installing and selecting return air filters for the furnace.
Guidelines for venting the furnace through a wall.
Specific instructions for venting through non-combustible wall materials.
Procedures for venting through combustible wall materials.
Details on how to properly vent the furnace through the roof.
Guidance for using stainless steel vent pipe in masonry chimneys.
Instructions for venting the furnace through a ceiling.
Procedures for managing condensate drains in vertical furnace installations.
Guidelines for condensate drain management in horizontal furnace installations.
Illustrates wiring connections for single-stage heating and cooling.
Details on gas piping for left-hand installations in upflow configurations.
Instructions for gas piping in upflow configurations for right-hand installations.
Steps for adjusting the gas valve to set manifold pressure.
Essential checks to perform before starting up the furnace.
Describes the step-by-step process of furnace operation.
Covers adjustments for control modules and safety switches.
